Search
Close this search box.
Search
Close this search box.

General Speedrooter 92 Drain Cleaner

$3,283.00$3,381.00

Contractors know that the Speedrooter 92 really can take a beating – from its frame braced at key stress points, to General’s exclusive Flexicore® wire rope center cable that’s so tough it carries a one year warranty. The Speedrooter 92’s field-tested design offers easy handling. One person can easily load it onto a truck, as the machine slides smoothly from the loading wheel to the handle to the stair climbers and finally to the wheels. Plus it has an adjustable handle.

Basic Unit Includes: 1/2 hp Capacitor Motor, Power Cable Feed, S92-450 Large Drum, Water-Proof Air Foot Switch, 20 ft. Power Cord w/GFI, Leather Gloves.

Model #What's IncludedCutter SetWeightPrice
P-S92-CBasic Unit + 100EM5 (100 ft. x 3/4"), guide tubeSRCS242 lbs.$3381.00
P-S92-EBasic Unit + 100EM4 (100 ft. x 5/8"), guide tubeSRCS220 lbs.$3283.00

*SRCS Cutter Set: 3SCB, 4SCB 3″ and 4″ Side Cutters, 3HDB 3″ Heavy Duty Saw Blade, SHD Spear Head, 2UC 2″ U-Cutter, 4RSB 4″ Rotary Saw Blade, RTR-2 Large Retrieving Tool, LE-3 Flexible Leader, 26″ long.

Speedrooter 92® Drain Cleaner

• Clears 3″ through 10″ drains up to 100 ft. down the line.
• Drum holds 100 ft. of 3/4″ or 5/8″ Flexicore® cable.
• Inner drum cage and Self-aligning Flexitube® spring distributor tube reduces cable tangling.
• Power Cable Feed drives and retrieves cable at up to 20 ft. per minute.
• Features stair climbers, 10″ ball bearing tires, truck loading wheel and tool box.
• 1/2 hp motor strong enough to drive cable 200 ft. down the line.
• Adjustable height handle can be 3″ taller or more compact.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
• Made in U.S.A.

Power Cable Feed:
Drives and retracts at variable speed of up to 20 ft. per minute.

Guide Tube:
Greatly increases the efficiency of power cable feed by reducing cable whipping and drag. Keeps your hands off of the spinning cable. Tube is 30″ long. Five foot extensions are made of rigid conduit with a flexible spring end.

SRCS Cutter Set:
3SCB, 4SCB 3″ and 4″ Side Cutters, 3HDB 3″ Heavy Duty Saw Blade, SHD Spear Head, 2UC 2″ U-Cutter, 4RSB 4″ Rotary Saw Blade, RTR-2 Large Retrieving Tool, LE-3 Flexible Leader, 26″ long.

Portability, Convenience, and Safety:
Equipped with 10″ heavy-duty wheels, stair climbers, tool box and ground fault circuit interrupter.

Truck Loading:
One person easily loads the Speedrooter 92 onto a truck. The swept-back handle and loading wheel give you the needed leverage. Wheel brake keeps machine in place on the job or in the truck.

V-belt Stair Climbers:
V-belt stair climbers like the ones used to move heavy furniture and appliances let you take the Speedrooter 92 up a flight of stairs yourself. Heavy-duty V-belts running on nylon rollers.

Tool Box:
Attached to rear of machine. Holds all cutters except Flexible leader.

Leather Gloves:
With double-reinforced palm for hand protection when guiding cable.

Weight:
Weight: 115 lbs. (52 kg) without cable

Capacity:
Large drum holds 100 ft x 3/4″ or 5/8″ cable (30 m x 19 mm or 17 mm).

Motor:
1/2 hp with capacitor, forward-off-reverse switch, 20 ft. power cord and ground fault circuit interrupter. (3/4 hp optional)

Foot Pedal:
Leaves operator’s hands free to control cable. Uses air pressure, so there’s no electrical contact between pedal and motor.

Removable Drum:
Loosen two knobs, remove ringbolt, and lift off.

Features
Like all General’s floor models, the Speedrooter 92 offers you the safety of an in-line ground fault circuit interrupter, pneumatic foot pedal, and reverse switch with an “off” position.

Dimensions:
26″ deep, 22″ wide, 41″ high (66 cm x 56 cm 104 cm)

Wheels:
10″ semi-pneumatic heavy duty with ball bearings.

Flexicore® Cable:
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage. Left wound Flexicore® wire rope center 3/4″ diameter for 4″ to 10″ lines and 3″ lines without sharp bends; 5/8″ diameter for 3″ to 6″ lines; 9/16″ diameter for 2″ to 3″ lines.

Cutter Options

P-S92-E 100EM4 (100 ft. x 5/8″), P-S92-C 100EM5 (100 ft. x 3/4″)

Scroll to Top