The Rodrunner offers all the features that contractors like in a sectional sewer cleaner – light weight, high speed cable rotation, and short quick-coupling cables.
Two Way Operation: Most often, you set the Rodrunner up close to the drain opening. However, on easier jobs where you have some working room, you can run the machine “lawn-mower” fashion, standing behind the machine.
For close-up work, the wheel brake is set, the power switch is placed next to the machine to be used as a foot switch, and the cable guide hose is attached. Now, the Rodrunner is ready to handle the toughest stoppages in 3-10″ lines, as far as 200 feet away.
A heavy-duty 3/4 hp motor with capacitor and overload protection spins cable at 485 rpm, an ideal speed for self-feeding into the line while protecting the cable against sudden torque build-ups. For additional protection, the Rodrunner has an adjustable slip clutch, which is factory set at 18-20 ft. lbs. An optional set of jaws (R-R10AD) enables the Rodrunner to drive 15 ft. x 7/8″ (15R10) cables to clear smaller lines.
Two Way Chuck Handle:
Locked down against cable, you have both hands free to hold the cable. This is a real help when pulling cable out of the line.
Pneumatic Power Switch:
Power switch is located on handle for storage and use in “walk-in” operation. For close-up work, it’s removed from handle for use as a foot switch.
Cable Feeding Tool:
It enables cable to get around tight bends and traps by taking advantage of open-wound design of cables. Note that operator controls machine by using power switch in foot pedal mode.
Dimensions:
22″ wide x 19″ high with handle folded down.(56 cm x 48 cm)
Motor:
Heavy-duty 3/4 hp with capacitor and 20 ft. power cord rotates cables at 485 rpm. Equipped with ground fault circuit interrupter.
Wheels:
10″ rubber rear wheels, 6″ solid rubber caster wheel.
Wheel Brake:
Locks rear wheels in place or releases them in an instant.
Combination Hand or Foot Operated Power Switch:
Air activated for safety; no electrical connection between motor and switch; can be used as hand or foot switch. Eleven foot air tube.
Safety Clutch:
An adjustable spring-loaded clutch is mounted at the rear of the cable drive shaft. Accessible without removing machine housing.
Chuck Handle:
Clamps on cable or acts as “dead-man’s throttle.”
Cable Counter:
Manually operated, to record number of cables in line.
Rear Cable Guide Hose:
To limit cable whipping behind machine.
Folding Handle:
Reduces truck storage space.
Cutter Set with “G” Connectors:
Spear Head, Hook Auger, 2″ U-Cutter, 3″ Heavy Duty Side Cutter, 3″ Heavy Duty Saw Blade, 4″ Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench.
Cutter Set with “L” Connectors:
Spear Head, Hook Auger, 2″ U-Cutter, 3″ Heavy Duty Side Cutter, 3″ Heavy Duty Saw Blade, 4″ Rotary Saw Blade, Large Retrieving Tool,Coupling Wrench.
Twin V-Belts:
For better power transmission.
| PART # | Cable Sections | RDCS-G | RDCS-L | Weight | Price |
|---|---|---|---|---|---|
| RD | Basic Unit: 3/4 hp Capacitor Motor w/Rev. Switch, Water-Proof Air Foot Switch, 20 ft. Power Cord w/GFI, Leather Gloves (no cables, no cutters) | 105 lbs. | 3284.00 | ||
| RD-GP | Basic Unit + (ten) 10GP Proflex sections with "G" connectors, Rear Guide Hose | included | 258 lbs. | 4915.00 | |
| RD-LP | Basic Unit + (ten) 10LP Proflex sections with "L" connectors, Rear Guide Hose. | included | 278 lbs. | 4523.00 |
• Self feeds 8, 10 and 15 foot sectional cables.
• Pneumatic foot pedal frees both hands to control cable.
• Can be used as “Close-up” or “Walk-behind” machine.
• 3/4 hp motor can drive sectional cables 200 ft. down the line.
• Safety slip clutch protects against sudden torque build-ups.
• Features folding handle, 10″ tires, and cable counter.
• Made in U.S.A
All Units Include: 3/4 hp Capacitor Motor w/Rev. Switch, Water-Proof Air Foot Switch, 20 ft. Power Cord w/GFI, Leather Gloves.
*RDCS-G Cutter Set: Spear Head, Hook Auger, 2″ U-Cutter, 3″ Heavy Duty Side Cutter, 3″ Heavy Duty Saw Blade,
4″ Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench.
*RDCS-L Cutter Set: Spear Head, Hook Auger, 2″ U-Cutter, 3″ Heavy Duty Side Cutter, 3″ Heavy Duty Saw Blade,
4″ Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench
Reviews
There are no reviews yet.