General Model 88 Drain Cleaner
The Model 88 is almost as easy to run as a lawnmower. You push eight- or ten-foot cable sections into the line until you reach some resistance. Then attach the rear cable coupling to the machine, stand behind it, and turn it on. Watch the cable feed itself into the line. When a section has run into the drain, attach another one and keep going. This self-feeding feature also works to pull sections out of the line.
The Model 88 handles jobs up to 200 ft. long in lines from 3″ to 10″ diameter. A standard 3/4 hp capacitor motor supplies plenty of power, and an adjustable safety clutch protects cables and operator.
Sections come in two styles: all-purpose Flexichain, which has a chain center, and the stiffer Proflex, which has a spring center. A chain assures easier cable retrieving if the Flexichain spring should break. The inner spring in the Proflex gives it greater stiffness, which is desirable for long or tough jobs. The outer spring is right-hand wound for faster self-feeding.
Cable sections snap together in a second and are taken apart quickly with a spanner wrench or screwdriver. With the newer “G” connector, no tension is on the locking pin when running in reverse, making it a more durable coupling. Snap on the optional 78L-CDC adapter and you can use 6 ft. x 7/8″ cables (6L78) to clear smaller lines.
“G vs. “L” Connectors:
Clutch:
Pull down two position handle to spin cables at 400 RPM. Lift to stop. Brake stops spinning drums instantly.
Motor:
Sealed 1/2 hp with forward – off – reverse switch, ten foot power cord and ground fault circuit interrupter.
Dimensions:
16″ deep; 14″ wide; 17″ high. (40 cm x 35 cm x 43 cm).
Flexicore® Cable:
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage. 3/4″ diameter for 4-10″ lines and 3″ lines without sharp bends. 5/8″ diameter for 3-6″ lines.
R-8CS Cutter set for 5/8″ cables:
Arrow Head, Boring Gimlet, 1-1/2″ U-Cutter and Retrieving Tool.
R-10CS Cutter set for 7/8″ cables:
Spear Head, 2″ U-Cutter, 3″ U-Cutter, Hook Auger and Retrieving Tool.
Cables:
“T” slot couplings slide together to lock and uncouple with a pin key.
5/8″ x 7-1/2 ft…for 1-1/4″ through 3″ lines up to 100 ft long;
7/8″ x 15 ft….for 2″ – 4″ lines up to 125 ft. long.
Stability and Durability:
The Root 66 has a wide four point base for greater stability. Its interlocking tubular construction also gives it excellent durability. To protect the gears from dirt and for easier cleaning, the machine has two internal plastic shields. A ground fault circuit interrupter is standard equipment.
Jaws:
Drive both 5/8″ and 7/8″ cables without adjustment; also grip containers for smaller diameter cables.
Drip Guards:
Two shields to protect bearings and motor from dirt and moisture.
| PART # | What's Included | Weight | Price |
|---|---|---|---|
| 88-G | Basic Unit: 3/4 hp Capacitor Motor, Adjustable Clutch, "G" Connector,Water-Proof Air Foot Switch, 20 ft. Power Cord Leather Gloves (no cables, no cutters)w/GFI, | 100 lbs. | 3387.00 |
| 88-L | Same as above, except with "L" Connector | 100 lbs. | 3343.00 |
| 88-GP | Basic Unit + Ten 10GP Proflex Sections w/"G" Connectors, Cable Feeding Tool, RDCS-G Cutter Set | 268 lbs. | 4758.00 |
| 88-GF | Basic Unit + Ten 10GF Flexichain Sections w/"G" Connectors, Cable Feeding Tool, RDCS-G Cutter Set | 248 lbs. | 4769.00 |
| 88-8LP | Basic Unit + Thirteen 8LP Proflex Sections (104 ft.) w/"L" Connectors, Cable Feeding Tool,RDCS-L Cutter Set | 277 lbs. | 4806.00 |
| 88-LP | Basic Unit + Ten 10LP Proflex Sections w/"L" Connectors, Cable Feeding Tool, RDCS-L Cutter Set | 268 lbs. | 4623.00 |
| 88-LP | Basic Unit + Ten 10LF Flexichain Sections w/"L" Connectors, Cable Feeding Tool, RDCS-L Cutter Set | 248 lbs. | 4633.00 |
*RDCS-G Cutter Set: Spear Head, Hook Auger, 2″ U-Cutter, 3″ Heavy Duty Side Cutter, 3″ Heavy Duty Saw Blade,
4″ Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench.
*RDCS-L Cutter Set: Spear Head, Hook Auger, 2″ U-Cutter, 3″ Heavy Duty Side Cutter, 3″ Heavy Duty Saw Blade,
4″ Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench.
Reviews
There are no reviews yet.