Here’s a sectional cable machine that drives 7/8″ and 5/8″ sections – or even 5/16″ cables for small drain work. You can switch from 7/8″ to 5/8″ and back by repositioning the chuck cone. No adapter required. Attach a small drum to the back of the machine to drive smaller cables. The I-95 gives you more than versatility. It gives you power and convenience. The motor is a 1/3 hp capacitor type, so it delivers plenty of torque to the cables. Yet, as soon as you lift the drive handle, the cable stops rotating, so there’s no additional torque build up. You also use the drive handle to carry the machine. And when the I-95 is in position on the job, its four point base gives it rock-solid stability. A cutter holder is attached to the back so your cutting heads are always with the machine. A ground fault circuit interrupter is standard equipment.
Weight:
Weight: 39 lbs. (18 kg) without cable
Capacity:
Capacity of 129 ft. (39m) of 3/4″ or 154 ft. (46m) of 5/8″ cable.
Includes 4 ft. of drum connecting cable.
Motor:
1/3 hp with forward-off-reverse switch, ten foot power cord, and ground fault circuit interrupter.
Dimensions:
14″ deep x 12″ wide x 23″ high. (35.5 cm x 30.5 cm x 58.4 cm).
Flexicore® Cable:
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage. 3/4″ diameter for 4-10″ lines and 3″ lines without sharp bends. 5/8″ diameter for 3-6″ lines.
R-8CS Cutter set for 5/8″ cables:
Arrow Head, Boring Gimlet, 1-1/2″ U-Cutter and Retrieving Tool.
R-10CS Cutter set for 7/8″ cables:
Spear Head, 2″ U-Cutter, 3″ U-Cutter, Hook Auger and Retrieving Tool.
Cables:
“T” slot couplings slide together to lock and uncouple with a pin key.
5/8″ x 7-1/2 ft…for 1-1/4″ through 3″ lines up to 125 ft long;
7/8″ x 15 ft….for 2″ – 4″ lines up to 150 ft. long. (Proflex upgrade available)
Stability and Durability:
The I-95 has a wide four-point base for greater stability. Its interlocking tubular construction also gives it excellent durability. A ground fault circuit interrupter is standard equipment.
Adjustable Chucks:
Has two sets of notches; one for 5/8″ cables and one for 7/8″ cables.
Switch from one diameter to the other in seconds.
Universal Jaws:
Jaws handle both 7/8″ cables or 5/8″ cables. No adaptor required.
Portable:
The drive handle doubles as a carrying handle and the machine is compact and light enough to carry up to the roof.
Leather Gloves:
With double-reinforced palm for hand protection when guiding cable.
Â
| PART # | Cable(s) | R-8CS | R-10CS | Toolbox | Weight | Price |
|---|---|---|---|---|---|---|
| I-95 | Basic Unit: 1/3 hp Motor w/Rev. Switch,10 ft. Power Cord w/GFI | 47 lbs. | 1822.00 | |||
| I-95-A | (six) 7-1/2 ft. x 5/8" sections (7.5R8) | included | 72 lbs. | 2318.00 | ||
| I-95-C | (five) 15 ft. x 7/8" standard sections (15R10)* | included | included | 122 lbs. | 2618.00 | |
| I-95-D | Combines Units A and C | included | included | included | 143 lbs. | 3029.00 |
| I-95-E | Combines Units A and C, plus small drum with 25 ft. x 5/16" cable | included | included | included | 153 lbs. | 3366.00 |
R-8CS Cutter Set (for 5/8″ cables): Arrow Head, Boring Gimlet, 1-1/2″ U-Cutter and Retrieving Tool.
R-10CS Cutter Set (for 7/8″ cables): Spear Head, 2″ U-Cutter, 3″ U-Cutter, Hook Auger and Retrieving Tool.
Reviews
There are no reviews yet.