| PART # | What’s Included | w/HECS Cutter Set* | Price |
|---|---|---|---|
| DRZ-PH | Basic Unit: Variable Speed Cable Feed, 4 ft. Guide Hose, Aluminum Drum, Motor, Water-Proof Air Foot Switch, Plastic Cartridge | $1097.00 | |
| DRZ-PH-A | Basic Unit + 50HE1-A-DH (50 ft. x 5/16″) | NONE | $1124.00 |
| DRZ-PH-B | Basic Unit + 50HE1-AC (50 ft. x 5/16″)Accessories. | X | $1215.00 |
| DRZ-PH-C | Basic Unit + 35HE2 (35 ft. x 3/8″) | X | $1207.00 |
| DRZ-PH-D | Basic Unit + 50HE1 (50 ft. x 1/4″) | NONE | $1146.00 |
| * HECS Cutter Set: Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4″ Side Cutter Blade, Flexible Arrow Head Cutter. |
Model DRZ-PH with Power Cable Feed
The variable speed power cable feed on the Model DRZ-PH gives you complete control as it feeds and retrieves the cable at up to 16 ft per minute. The four foot guide tube means you never have to touch the cable – so your hands, and the job site, stay clean.
Cartridge Refill
To switch to a different diameter cable (or even connect two 3/8″ cables together), you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you’ll probably want to store all of your cables in them.
Weight:
Weight: 30 lbs. (13.6 kg) (without cable)
Dimensions:
20″ deep (w/o Guide Hose) x 11″ wide x 15″ high (51 cm x 28 cm x 38 cm)
Model DRZ-PH Drum:
Heavy gauge stamped aluminum with inner drum to prevent cable tangling.
Flexicore® Cable:
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.
Capacity:
50 ft. of 1/4″ or 5/16″ cable; 35 ft. of 3/8″ cable.
All cables are left hand wound and reinforced with a wire rope center.
Model DRZ-PH Power Cable Feed:
Variable Speed; Drives 1/4″, 5/16″ and 3/8″ cables.
Cutter Set:
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4″ Side Cutter Blade, Flexible Arrow Head Cutter.
Motor:
1/5 hp, with forward-off-reverse switch, fuse protected.
Foot Pedal:
Pneumatic foot pedal leaves operator’s hands free to control cable.
Reviews
There are no reviews yet.